Rating of the TOP 10 wood discs for an angle grinder: an overview and characteristics of the best models of 2022

A wood disc for a grinder - an overview and rating of the best models. Key features and parameters of equipment. Selection criteria, pros and cons of wood saw blades for angle grinders.

The saw blade for the grinder, equipped with a cutting edge with teeth, can be used when working with wood and wood-based materials.

This variety wheel for angle grinders is able to provide an even and clean cut of boards, plywood, parquet, laminate, fiberboard and chipboard.

In this review, we will consider the best models of saw blades for angle grinders, and dwell on the criteria for choosing equipment of this type.

What to look for when choosing a saw blade for wood?

The key features that you should pay attention to when choosing a saw blade for an angle grinder are as follows:

The outside diameter of the tool.
The size of the circle largely depends on the power of the angle grinder and the type of work being done.
12.5 cm disks are considered the most suitable for a tree.
Larger diameter increases productivity, but requires professionalism and increased safety measures.
Internal (landing) diameter.
For angle grinders, it is standard - 22 mm.
Otherwise, discs can be installed through special adapter rings.
Some models of equipment may be equipped with this accessory.
Disk type.
Monolithic equipment is characterized by low cost, but requires periodic tooth setting and sharpening.
More durable carbide blades require less maintenance and produce clean cuts at any speed.
Number of teeth.
A cross cut requires the use of discs with a large number of cutters - 60-90.
Accordingly, the longitudinal cut is obtained better when using models with a small number of teeth.
Rotational speed.
High speed discs are suitable for working in dense and hard wood.
The low RPM tooling is ideal for soft and tough woods.

Best 125mm discs

A small diameter rig will do a great job with thin wood. 12.5 cm discs are recommended for use with network and battery angle grinders of compact dimensions.

Rating of the TOP-5 discs for a 125 mm wood grinder according to customer reviews and ratings.

Sparta 732395 125x22 mm

The saw blade Sparta 732395, made of special alloys, is equipped with teeth with a carefully selected sharpening angle, which allows performing high-quality and high-performance work on sawing wood.

The model is equipped with compensation slots that reduce vibrations, suppress noise, and prevent deformation of the element during intensive work.

The outer diameter of the disc is 12.5 cm, the inner diameter is 2.2 cm.

The kit includes adapter rings that allow you to use equipment with tools that have different bore diameters.

Specifications:

outer diameter - 12.5 cm;
landing size - 22 mm;
number of teeth - 36;
speed - 10000 rpm;
disc type - carbide;
processing material - wood.

Advantages

clean cut;
acceptable price;
performance quality;
exact landing on the grinder.

Flaws

heating at high speeds;
not a deep cut.

TUNDRA 1032324 125x32 mm

The saw blade for the grinder TUNDRA 1032324 will provide high-quality sawing of wood thanks to a special scheme for sharpening carbide teeth.

The model is equipped with compensation slots to reduce vibrations, suppress noise and ensure that the tooling does not deform as a result of heating under intense load.

The package includes additional adapters (rings for 20/32 and 16/32) for angle grinders with the appropriate fitting diameters.

The device provides a clean type of cut.

Specifications:

outer diameter - 12.5 cm;
landing size - 32 mm;
number of teeth - 36;
speed - 7000 rpm;
disc type - carbide;
processing material - wood.

Advantages

Ease of use;
safety;
clean cut;
democratic pricing.

Flaws

not suitable for high speeds;
not the best packaging quality.

VIRA RAGE 125 mm

The saw blade VIRA RAGE is an ideal solution for cutting, profiling, stripping and other work on any type of wood and its derivatives using an angle grinder.

The outer diameter of the device is 12.5 cm, the inner diameter is 2.2 cm. The cutting thickness is 3.8 mm.

The design of the tooling guarantees minimum kickback when used with an angle grinder, eliminates severe deformation as a result of heating during long-term intensive work with hardwoods.

Specifications:

outer diameter - 12.5 cm;
landing size - 22.23 mm;
number of teeth - 3;
speed - 12200 rpm;
disc type - carbide;
processing material - wood.

Advantages

easy move;
lack of beats;
affordable cost;
sharp edge.

Flaws

rather rough cut;
not the highest accuracy;
heating at high speed.

STAYER Woodcut 36854-125 125x22.2 mm

The STAYER Woodcut saw blade 36854-125 is a productive and safe piece of equipment suitable for a variety of tasks with perfect results.

The model will provide a clean and neat cut.

The disc is compatible with the STAYER angle grinder, and in addition to sawing, it can be used for transverse material sampling.

The special geometry of the cutting elements made of hardened steel allows you to work with wood and plastic.

The rig guarantees a maximum linear speed of 80 m/s, no deformation due to heating.

Specifications:

outer diameter - 12.5 cm;
landing size - 22.2 mm;
number of teeth - 3;
speed - 12250 rpm;
disc type - carbide;
processing material - wood, plastic.

Advantages

quality cut;
lack of noise and beats;
versatility of use;
quality performance.

Flaws

small depth of cut;
low performance;
heating at high speed.

Storm! 9020-125-22-36T 125x22.2 mm

Model Sturm! 9020-125-22-36T is an interchangeable saw blade for rip and cross cuts in soft and hard woods, plywood, chipboard, laminate and other materials.

Tooling is made on high-tech equipment.

Its base is made of carbon steel, the cutting part is reinforced with carbide plates.

The landing diameter of the model is 2.2 cm, the external size is 12.5 cm.

The special shape of the teeth makes it possible to perform both longitudinal and transverse cuts with high accuracy.

Specifications:

outer diameter - 12.5 cm;
landing size - 22.2 mm;
number of teeth - 36;
speed - 9000 rpm;
disc type - carbide;
processing material - wood, laminate, plate.

Advantages

high-quality propyl;
affordable price tag;
easy move;
no vibration.

Flaws

shallow cut;
heating at high speeds;
noisy model.

The best discs with a diameter of 260-310 mm

The large-diameter rig is suitable for sawing large boards, panels and timber. Recommended for use with a powerful professional tool with reliable protection.

Makita Standart B-29234 260x30 mm

High-quality equipment for grinder Makita Standart B-29234 will provide a clean and accurate cut when sawing hard and soft wood, as well as derivatives of this material.

The model is equipped with 40 teeth made of hardened steel, the landing size of the disc is 3 cm, the outer diameter is 26 cm.

This saw blade is recommended for use with professional angle grinders.

The device allows you to perform work at speeds up to 5870 rpm.

The equipment is delivered in high-quality and ergonomic packaging.

Specifications:

outer diameter - 26 cm;
landing size - 30 mm;
number of teeth - 40;
speed - 5870 rpm;
disc type - carbide;
processing material - wood.

Advantages

affordable price;
holds the corner well;
clean cut;
absence of beats.

Flaws

does not work well with hard materials;
paint wears off quickly.

Makita Standart B-29290 305x30 mm

The Makita Standart B-29290 model, made of carbide materials, will allow you to make an accurate and clean cut when working with boards, planks, skirting boards and other elements in decoration and construction.

The tooling is characterized by a long service life, a special ATB tooth shape, a hardened blade with 80 teeth.

The disc with its own thickness of 1.8 mm allows cutting up to 2.3 mm.

Recommended for use with corded and cordless angle grinders with a 3 cm bore.

Specifications:

outer diameter - 30.5 cm;
landing size - 30 mm;
number of teeth - 80;
speed - 5000 rpm;
disc type - carbide;
processing material - wood.

Advantages

high-quality propyl;
large diameter;
lack of beats;
convenient packaging.

Flaws

high price;
not suitable for high speeds;
noisy model.

ZUBR Expert 36907-305-30-100 305x30 mm

Saw blade BISON Expert 36907-305-30-100 with trapezoidal teeth and a negative angle of inclination is suitable for precise longitudinal and transverse sawing of wood, aluminum, laminate and plastic.

The teeth in this model are reinforced with plates made of hard-alloy tungsten carbide materials (VK8), provided with automatic three-sided sharpening with grinding of each element for perfect geometry.

With its own thickness of 2 mm, the tooling makes it possible to make a cut with a width of 2.8 mm.

The maximum speed of the model is 5000 rpm.

Specifications:

outer diameter - 30.5 cm;
landing size - 30 mm;
number of teeth - 100;
speed - 5000 rpm;
disc type - carbide;
processing material - wood, plastic, metal.

Advantages

works with a wide range of materials;
gives a clean and even cut;
perfect workmanship;
high performance.
Advantage;

Flaws

not democratic price tag;
vibrations are present.
great weight.
Flaw;

DeWALT Extreme DT4260-QZ 305х30 mm

The high-quality DeWALT Extreme DT4260-QZ carbide saw blade will provide accurate cuts when working with plywood, veneer, softwood and hardwood.

The presented equipment is also suitable for cutting soft non-ferrous metals.

The model can be used with corded and cordless angle grinders with a 3 cm bore.

With its own thickness of 1.8 mm, the element provides a cut of 2.6 mm.

The equipment has an improved balance that prevents distortion, vibration and provides increased cutting accuracy.

Specifications:

outer diameter - 30.5 cm;
landing size - 30 mm;
number of teeth - 60;
speed - 5800 rpm;
disc type - carbide;
processing material - wood.

Advantages

quality performance;
eminent manufacturer;
clean and even cut;
excellent sharpening of teeth.

Flaws

non-critical beats;
big weight;
high price.

CMT 294.060.11M 260x30 mm

The saw blade CMT 294.060.11M, suitable for use with an angle grinder, is the ideal solution for cutting soft and hard wood, plywood, veneer, various panel materials.

The model guarantees clean and precise rip and cross cuts.

The equipment is compatible with mains and cordless angle grinders with a 3 cm mounting hole.

The thickness of the disc is 1.8 mm, the width of the cut is 2.5 mm.

The model withstands a maximum speed of 7300 rpm, weighs 1900 g, has slots that reduce vibration and noise.

Specifications:

outer diameter - 26 cm;
landing size - 30 mm;
number of teeth - 60;
speed - 7300 rpm;
disc type - carbide;
processing material - wood, plate.

Advantages

manufacturing quality;
lack of beats and vibrations;
large disc diameter
quality cut.

Flaws

high price;
equipment is heavy;
noisy at high speed.

Reviews

Customer Reviews

{{ reviewsOverall }} / 5 Grade (3 total valued)

Overall score

Total reviews:

Checked

{{{ review.rating_title}}}

{{{review.rating_comment | nl2br}}}

Review responses ({{review.rating_replies.length}})

This review has no replies yet.

Useful video

From this video you will learn what to look for when choosing wood discs for angle grinders:

Conclusion

The saw blade for the angle grinder allows you to work with soft and hard wood, wood-based materials - plywood, parquet, laminate, fiberboard and chipboard panels.
When choosing a wood disc for an angle grinder, one should take into account the external and internal diameter of the equipment, its type, the number of teeth, and the supported rotation speed.
Saw blades with a diameter of 12.5 cm are suitable for small jobs in thin wood, equipment for 26-31 cm is recommended for sawing large wood materials.

Reviews Ratings