Rating of the TOP 5 rotary hammers with a dust collector in 2022 and tips for choosing

In this article, we will consider the best models of rotary hammers with dust collectors, which are recommended by experts in the fields of construction and repair, as well as those that have collected a large number of positive reviews from the Internet audience. We will study the technical characteristics of each tool, as well as its advantages and disadvantages.

All masters working with a puncher will confirm that dust is a big problem when work is done on the ceiling.

And then you have to clean it not only from the floor, but from all surfaces in the room.

To protect the respiratory organs and the room from dust, it is better to use a tool with a built-in dust extraction system.

Complete a vacuum cleaner, working in conjunction with a hammer drill, will make it possible to drill or chisel in the conditions of functioning objects: offices, hospitals, schools, shops and residential premises.

What to look for when choosing a rotary hammer with a dust collector?

Note! If you are going to buy a hammer drill with a dust collector, first of all, you should consider:
  • Maximum impact energy.
    This is the main characteristic of the tool, which determines its capabilities and performance.
    The higher this indicator, the larger the bit or drill can be used, and the chiselling will be faster.
  • Cartridge type.
    The most common mounting options are SDS-Max, they are equipped with more powerful rotary hammers, as well as SDS +, designed for low and medium power tools.
  • Operating modes.
    A professional hammer drill is usually equipped with two or three modes of operation.
    In chiseling mode, the operator can gouge and cut holes with a flat chisel.
    Hammer drilling will make holes in stone, concrete and metal.
    The drilling mode is useful in cases where it is necessary to make holes in cinder block, brick or aerated concrete.
  • Source of power.
    The puncher can work either from a power supply network, or from joint stock bank.

Overview of the best models

Rating of the best rotary hammers with a dust collector according to customer reviews and ratings.

Makita HR2652, 800W

Model It is positioned as a professional tool of a light class, designed for making holes, dismantling structures, removing coatings and chipping materials.

The unit is equipped with an SDS + cartridge, thanks to which tool change takes a minimum of time.

The HR2652 perforator has a mains supply and a complete dust collector with a telescopic suction tube.

Practical model HR2652 from the famous brand Makita can work in three modes: jackhammer, impact with drilling and drilling.

An impact energy of 2.2 J is enough to create holes up to 26 mm in diameter in brick, stone, durable concrete and other hard mineral materials.

There is an adjustment of the frequency of rotation and shock, reverse and a disengaging clutch. The orientation of the engine is horizontal.

Technical specifications:

  • power consumption - 800 W;
  • the number of strokes - 4600 beats / min;
  • maximum speed - 1200 rpm;
  • cartridge type - SDS +;
  • maximum impact force - 2.2 J;
  • net weight - 4.3 kg;
  • dimensions (W ? H ? D) - 60.4? 8.9? 26 cm;

Advantages

  • high build quality;
  • easy change of equipment;
  • convenient case;
  • the optimal cable length is 2.5 m.

Flaws

  • no vibration protection;
  • to reverse, you have to switch the position of the brushes.

Makita DHR182ZWJ

Compact and lightweight, the Makita DHR182ZWJ features a brushless motor for higher performance.

In order to protect against jamming, a splitting clutch is provided.

There is a reverse button to change the direction of rotation. The tool kit includes a case and a dust bag.

Lithium-ion battery has no memory effect and no self-discharge.

There is a possibility of regulation of speed, 3-component protection against vibrations and the strengthened protection against dust and moisture.

There is a compartment for an AWS Bluetooth adapter to connect with a vacuum cleaner and start at the same time.

Technical specifications:

  • the number of strokes - 5000 beats / min;
  • maximum speed - 1350 rpm;
  • cartridge type - SDS +;
  • maximum impact force - 1.7 J;
  • net weight - 2.4 kg;
  • dimensions (W ? H ? D) - 30.1? 8.2? 28.5 cm.

Advantages

  • light weight;
  • illumination of the working area;
  • there is an adjustment and maintenance of speed;
  • ease of operation.

Flaws

  • if you direct the drill down, the dust can spill out;
  • not the most convenient case;
  • no soft start.

Metabo KHA 18 LTX BL 24 Quick Set ISA 0, without battery

The battery model Metabo KHA 18 LTX BL 24 Quick Set ISA 0 is supplied without battery and charger.

The tool is equipped with three modes of operation: drilling, drilling and slotting.

The Metabo S-automatic safety clutch automatically blocks the drill when the wire is disconnected.

It is provided to turn off the impact for tightening screws and drilling without impact, as well as turning off the rotation for chiselling.

The battery packs are equipped with a charge indicator. Motor orientation is vertical.

Technical specifications:

  • number of strokes - 4500 beats / min;
  • maximum speed - 1200 rpm;
  • number of work speeds - 1;
  • cartridge type - SDS +;
  • maximum impact force - 2.2 J;
  • net weight - 4.5 kg;
  • dimensions (W ? H ? D) - 60.4? 8.9? 26 cm

Advantages

  • LED illumination of the working area;
  • efficiency and durability due to brushless technology;
  • the possibility of using a depth limiter;
  • ergonomic handle with rubber grip;
  • transparent window in the dust container.

Flaws

  • relatively high cost;
  • bulky design;
  • When you work hard, the battery drains quickly.

BOSCH GBH 2-23 REA, 710W

The BOSCH GBH 2-23 REA corded tool has a power consumption of 710 W and operates in two modes: drilling and impact drilling.

A suction device is provided on the body, which can be easily removed if necessary.

There is an electronic speed control, which is controlled by the force of pressing the trigger.

The depth limiter is built into the vacuum cleaner, controlled by a button located on the body. If the drill jams, the safety clutch will stop the engine.

For long-term operation, replaceable microfilters of the vacuum cleaner are provided, which must be replaced every 15 hours.

Technical specifications:

  • power consumption - 710 W;
  • number of strokes - 4400 beats / min;
  • maximum number of revolutions - 1000 rpm;
  • number of work speeds - 1;
  • cartridge type - SDS +;
  • maximum impact force - 2.3 J;
  • net weight - 3.6 kg.

Advantages

  • convenience in working overhead, for example, in stretching ceilings;
  • does not slip even in hands without gloves;
  • protection against injury due to the coupling;
  • the filter can be washed in running water;
  • flexible power cord.

Flaws

  • rigid suction corrugation;
  • small play in the nodes;
  • not vibration protection;
  • expensive accessories.

Makita HR4013CV, 1100 W

Model HR4013CV from the brand Makita consumes 1100 W of power and is designed to work in two modes: chiselling and drilling with chiselling.

There is a service indication of a switch and cable failure, as well as an indication of the wear of the carbon brushes.

A side handle is provided for reliable holding of the tool by the operator.

Implemented soft start, maintaining constant speed under load and an active vibration damping system AVT. There is a choice of one of 24 bit angle positions.

Comes with case, dust extraction system, drill lubricant and drilling depth limiter.

Technical specifications:

  • power consumption - 1100 W;
  • number of strokes - 2900 beats / min;
  • maximum number of revolutions - 500 rpm;
  • number of work speeds - 1;
  • cartridge type - SDS MAX;
  • maximum impact force - 8 J;
  • dimensions (W ? H ? D) - 48? 19 ? 20 cm
  • net weight - 6.8 kg.

Advantages

  • the ability to control the condition of the brushes;
  • ergonomics;
  • high performance;
  • good vibration protection system.

Flaws

  • the cable tans in the cold;
  • high price.

Reviews

Customer Reviews
{{ reviewsOverall }} / 5 Grade (3 total valued)
Overall score
Total reviews:

Checked
{{{ review.rating_title}}}
{{{review.rating_comment | nl2br}}}

This review has no replies yet.

Avatar
{{pageNumber+1}}

Conclusion

  • Hammer drills equipped with dust collectors are recommended for use when it is necessary to carry out construction or repair work indoors.
    Thanks to this, the master manages to localize accumulations of dust and dirt in the air and on the surface to be treated.
  • When choosing desired model you need to pay attention to the type of cartridge, the indicator of maximum impact energy, the number of operating modes and the power source.
  • There are models with vibration protection, they will be needed by the operator if the puncher has to work for a long time.

Useful video

This video provides an overview of the Makita HR2651T rotary hammer with a dust collector:


Leave a reply

 

Kitchen

Construction

Electronics