Rating of the TOP-12 brushes for the angle grinder in 2022: an overview of the best cord brushes, petal and grinding abrasive discs

Thanks to such, at first glance, a small, but very important detail like a brush on a grinder, you can solve a lot of repair tasks.

Scrape a few layers of old paint off a hardwood floor, remove rust from a metal structure, clean out welding seams, and more.

Severe operating conditions reduce the risk of brush life to a minimum, especially with constant use.

What features of brushes for grinders to pay attention to when choosing?

If you are going to buy a brush for a grinder, you should consider the following points:

• Look carefully pile: it should be the same length over the entire working area of ​​\u200b\u200bthe brush.
  If it is fixed in bunches - sometimes higher, sometimes lower, sometimes thicker, sometimes less often - during the process you will feel vibration, and the result of the work will be worse than you planned.
• For a setting like maximum revolutions per minuteshould also pay attention.
  Indeed, at low speed, a high-speed nozzle will be ineffective.
• The smaller the diameter of the brush, the more time will be spent on work.
  But you do not need a bulky model either: a very wide cleaning surface will overload the drive motor.
• The most budgetary are Chinese models, European ones are better in quality, but they are also more expensive.
  Domestic companies sell goods of average quality and at an affordable price.

In the manufacture of nozzles 4 types of brushes are used: corrugated, even, corded and twisted.

The corrugated one gently acts on the surface due to the springy effect, the corded one can sharpen itself during the action, the twisted one presses harder, but serves less than the others, and the even one is suitable for all surfaces without exception and is universal.

TOP 5 best cord brushes

Rating TOP-5 of the best metal cord brushes in terms of price and quality.

Cord brush Hammer 207-105

Cordbrush of the form most demanded by users is bowl-shaped.

With its help, you can perform surface treatment of a significant size.

Whether you are an ordinary user or a craftsman, this brush will perfectly cope with cleaning metal products, perfectly remove rust and paint, and help clean up welds.

The production uses 0.5 mm steel twisted wire, which will allow you to remove dirt even from hard-to-reach places.

Brass-plated steel bristles ensure durability and minimize the risk of corrosion.

The country of origin is China, the birthplace of the brand is the Czech Republic.

Specifications:

• length: 165;
• width: 110;
• height: 60;
• diameter: 75 mm;
• landing diameter of a shaft: М14;
• gross weight: 0.25kg.

Cord brush BOSCH 2608622061

Cup-shaped brush with corrugated bristles.

This model is suitable for work on angle and straight grinders and drills, i.e. is a professional level equipment from a world famous manufacturer.

Grinding metal surfaces, removing rust or paint - BOSCH 2608622061 can handle everything.

The diameter of the steel wire is 0.3 mm, due to the twisted shape, it easily penetrates into the most secluded places and pulls out even old dirt.

The shank used is M14. The rotation speed is 12500 rpm. The country of origin is Germany.

Specifications:

• outer diameter: 65 mm;
• wire thickness: 0.3mm;
• gross weight: 0.07kg.

Cord brush Hammer 207-113

Decent radial nozzle at an affordable price.

The working part of the Hammer 207-113 cord brush is made of corrugated steel wire.

By purchasing a nozzle with a diameter of 125 mm, you can not only clean old coatings and rust from metal surfaces, but also grind welds, as well as carry out rough grinding of workpieces.

The M14 nut attaches this tool to the angle grinder spindle.

The shape of the cord brush is radial, which means that the user is guaranteed a stable and efficient workflow even in the case of processing surfaces with a non-uniform relief.

The bristles are evenly distributed over the entire surface, the length of the bristles is the same, it does not leave scratches on the surface. A piece of equipment is included.

Specifications:

• wire diameter: 0.5mm;
• processing depth: 0.05-0.15 mm;
• landing diameter: M14;
• purpose: work on metal and wood.

Cord brush Hammer 207-102

A moderately soft cord brush used for finishing cleaning wooden and cooking surfaces, processing welds, removing traces of rust and old paint.

The bristles are thick and even, due to which the surface of the workpiece is leveled evenly and accurately, the strength of the seams is also increased and static stress is removed.

Brass-coated bristles give a plus to wear resistance. The steel wire is rigidly fixed on the steel base of the cord brush.

The cup shape is suitable for both cranked and flat surfaces.The permissible processing depth is from 0.05 to 0.1 mm.

Rotation speed - 12500 rpm. The country of origin is China.

Specifications:

• weight: 0.21 kg
• length: 165 mm;
• width: 110 mm;
• height: 65 mm;
• outer diameter: 75 mm
• wire thickness: 0.3 mm.

Cord brush matrix 74632

This disc brush is one of the most popular replacement parts for angle grinders.

It is successfully used for cleaning any surface from old paint, varnish and traces of corrosion, for grinding and polishing products.

The working part is a steel wire of small diameter, twisted into small bundles. The brush is made in the form of a disk.

Braided bundles are so resilient that they allow you to work in the most inaccessible places, cleaning out dirt and grease accumulated there.

Nozzle type - flat, wire shape - twisted. Wire thickness: 0.5 millimeters.

The cord brush can be attached using a standard angle grinder wrench. Great wear resistance. The brand is from Germany.

Specifications:

• mass: 0.32 kg;
• length: 165 mm;
• width: 130 mm;
• height: 250 mm;
• mounting hole diameter: 22.2 mm.;
• maximum speed: 10000 rpm.

TOP 3 best petal discs

Review of the best petal discs for grinder.

Petal disc Hammer 213-017

Flap disk from a German power tool manufacturer: small but able to serve you for a long time.

If you have to work with plastic or wooden products of any density, with metal structures, we advise you to buy this particular product from Hammer.

Firstly, it perfectly grinds surfaces, secondly, it has a high working resource, and thirdly, it does not overheat during operation due to optimal heat removal during the entire process.

There are no harmful impurities in the product (and other well-known manufacturers often sin with this), so interaction with it will not bring harm to your health.

Suitable for both permanent and occasional jobs. Great for cleaning inside corners. The package contains 2 pieces.

Specifications:

• grit (P): 60;
• landing diameter: 22 mm;
• diameter: 125 mm.

Flap disc Vira 559125

The flap type grinding wheel is suitable for both primary and final processing.

Excellent for wood and metal surfaces.

You can easily prepare the floor in the house for painting, or reconstruct the front part of the wooden house.

The petals are located radially in a fan type, due to which the performance of this element is high (in comparison with similar consumables).

The inner (landing) diameter of the disk is 22.2 mm, the outer one is 125 mm, the modification is even. The nominal number of disks in a set is 1 piece.

The country of origin is China.

Specifications:

• grit: P25;
• purpose of the circle: wood, metal, plastic;
• maximum number of revolutions: 12000 per minute.

Petal disc Hammer 213-016

Element for the treatment of metal blanks and surfaces from paint and corrosive deposits, the treatment of welding seams, the destruction of burrs on metal, the preparation of a wooden product for processing with paints and varnishes, etc.

It is used both in manual mode and on a machine (another grinding device), for simple and complex configurations (edges and joints of parts).

Outwardly, Hammer 213-016 looks like a standard grinding wheel, but there is an important nuance: the sandpaper is arranged in petals along the diameter.

The petal circle "sits" tightly in the cartridge.

The sandpaper is attached with resin. The package is sold in 2 pieces (main and spare). The depth of the excavation can be varied.

Specifications:

• grit (P): 40;
• landing diameter: 22 mm;
• diameter: 125 mm.

TOP 4 best grinding abrasive discs

The best grinding abrasive discs.

Grinding abrasive disc 3M 51748

A fundamentally new model of grinding wheel - a new class of abrasives for angle grinders.

A well-built model: unsurpassed in work with stainless metals and welds, for chamfering and descaling, preparing structures for welding and strengthening welds, and much more.

The abrasive of the grinding disc is made of aluminum oxide. Installation type - flange, convex shape, dry grinding is available.

Vibrations are absent even during long work, overheating of the part is also not observed. The production resource is large.

Specifications:

• dimensions: 125 mm in diameter;
• landing diameter: 22.23 mm;
• thickness: 7mm;
• grit: 36p.

Grinding abrasive disc PRACTICE 773-590

If you need an abrasive disc that is inexpensive and works as efficiently as possible - you need the PRACTICE 773-590 disc.

The shape of the circle is cup, suitable for angle grinders.

It perfectly copes with grinding both soft (horns and hooves of animals, hard and soft wood, cork, rubber, fiberglass) and hard (stone, brick, concrete) materials.

The grain on the wheel is large, sits firmly (in the case when the use of abrasive consumables is not possible, it fits perfectly).

Works with angle grinders with high speed. Includes 1 piece. The country of production is China.

Specifications:

• diameter: 125 mm;
• landing diameter: 22 mm;
• grain size (P): 8.

Grinding abrasive disc AnroKey AAR-DZ125S

The manufacturer AnroKey presents to your attention the grinding abrasive disc AAR-DZ125S - a disc that performs its task by 100 percent.

The working surface consists of grains of a certain fraction cemented together with a binder.

It is used for removing the top layer from surfaces, cleaning welds, peeling cast billets, removing rust and scale, as well as other contaminants.

Copes not only with perfectly flat, but also curved surfaces, helps to form grooves in soft alloys, concrete and non-ferrous metals.

Acceptable material: wood, plastic, stone, metal. Requires lubrication of the working surface to maintain performance for a long time.

Specifications:

• diameter: 125 mm;
• landing diameter: 22.2 mm;
• grain: silicon carbide.

Grinding abrasive disk AlfaDisk rounded 770-106

Ideal grinding rounded abrasive disc for high-quality grinding.

The body material is made of steel, the abrasive is made of tungsten carbide (this chemical compound is very durable and wear-resistant).

The grains are firmly soldered to the disc body.

Approved for work with the following materials: hooves and bones of animals, rubber, artificial stone, composite, foam concrete, brick, gas silicate blocks, wood.

By choosing the right speed of rotation of the disk, you will grind the surface you need with the highest quality.

The device allows you to work with one hand, without using a vise. Installation - on the flange. Grain size - 0.5 millimeters. Assembled in Russia.

Specifications:

• weight: 0.24 kg;
• length: 210 mm;
• width: 150 mm;
• height: 30 mm;
• diameter: 125 mm;
• landing diameter: 22.2 mm.

Reviews

Customer Reviews

{{ reviewsOverall }} / 5 Grade (3 total valued)

Overall score

Total reviews:

Checked

{{{ review.rating_title}}}

{{{review.rating_comment | nl2br}}}

Review responses ({{review.rating_replies.length}})

This review has no replies yet.

{{pageNumber+1}}

Useful video

From this video you will learn how the brushes are replaced in the grinder:

Conclusion

Angle grinder brushes are an extremely useful tool for the most comfortable cleaning and polishing of the surface. A suitable model can be bought in a store or ordered online.

The main thing is to learn at least a little about the characteristics and read reviews, then the risk of unpleasant surprises will be reduced to zero. Enjoy the shopping!