Rating TOP-14 Makita screwdrivers: an overview of the best cordless and corded models of 2022

Overview and rating of popular models of Makita screwdrivers. Main features, advantages, disadvantages and conclusions.

Company from Japan Makita has become famous all over the world for reliable and high-quality tools for construction and repair..

Screwdriver - the most necessary tool from the entire list, because used for many household tasks.

The company provides many options for models, but how to choose the most suitable among all the variety?

Rating TOP-14 best Makita screwdrivers

Place	Model	Price
Best low cost models up to 30 Nm
#1	Makita DF333DWYE4, 12 V, 1.5 Ah x2, case, bit set
#2	Makita DF347DWE Li-Ion 1.5 Ah 14.4 V х2 case
#3	Makita DF330DWE
#4	Makita HP333DWME Li-Ion 4.0 Ah 10.8 V x2 case
The best Makita screwdrivers with torque from 31 to 60 Nm
#1	Makita DF457DWE Li-Ion 1.5 Ah 18 V x2 case
#2	Makita DDF485RF Li-Ion 3 Ah 18 V х1 case
#3	Makita DDF453RFE
#4	Makita DHP485SYE
Top models with torque from 61 Nm
#1	Makita DDF481RF Li-Ion 3.0 Ah 18 V х1 case
#2	Makita DDF482Z, without battery
#3	Makita DDF481RTE Li-Ion 5 Ah 18 V x2 case
#4	Makita DDF481Z, without battery
Best Network Models
#1	Makita DF0300, box, 320W
#2	Makita FS4000, 570W

What features of Makita drill drivers should I look for when choosing?

Note! When deciding to purchase a well-known brand drill driver, the buyer should pay attention to the following points:

Appointment.
If the tool will be used almost daily, then only professional models should be considered.
Rotational speed.
It is directly proportional to the power of the device, 400-500 rpm is enough for domestic needs, more than 1000 for professional ones.
Food.
For the home, it is better to choose a model that works from the network.
Cartridge.
The keyless chuck is easier to maintain and better suited for home use.
Reverse function.
A nice addition that will facilitate the repair process.

Best low cost models up to 30 Nm

Such models Suitable for light housework and simple repairs. Ideal for furniture assembly.

Review and rating of the best Makita cordless screwdrivers with a minimum torque of up to 30 Newtons.

Makita DF333DWYE4, 12 V, 1.5 Ah x2, case, bit set

The Makita DF333DWYE4 model is ideal for furniture assembly, finishing work both outdoors and indoors.

The built-in backlight will help to more accurately and efficiently perform work in places where there is insufficient lighting.

Everything is done so that it turns off 10 seconds after the trigger switch is released.

The quick-release chuck increases ease of use - it can be easily unfastened.

Now more precise settings - 2 speeds and 18 torque gradations for contact with even the most difficult materials.

Specifications:

cartridge diameter: 0.8 - 10 mm;
maximum possible number of revolutions: 1700 rpm;
battery capacity: 1.5 Ah;
battery: Makita 12V max CXT;
voltage: 12V;
weight: 1.1 kg.

Advantages

convenient case;
compactness and low weight;
convenient to work;
very low price in comparison with competitors;
enough power for the house.

Flaws

"beats the head";
a fairly large amount of marriage in batches;
the cartridge is often untwisted.

Makita DF347DWE Li-Ion 1.5 Ah 14.4 V х2 case

There is a choice between two speeds, a special slider is installed for great convenience.

You can control the Makita DF347DWE with one hand, as all the switches are concentrated in one place.

The torque is set in one and 16 steps provided. The most convenient handle for holding - ergonomic body.

Comes with two batteries and a charger. Protection against accidental start is provided - blocking the inclusion.

Lightness and compactness make the screwdriver more mobile and comfortable to use.

Specifications:

cartridge diameter: 0.8 - 10 mm;
maximum possible number of revolutions: 1400 rpm;
battery capacity: 1.5 Ah;
battery: Li-Ion (G series);
voltage: 14.4 V;
weight: 1.4 kg.

Advantages

versatility for domestic use;
comfortable handle;
smoothness and power;
comfortable weight;
The battery holds a charge for quite a long time.

Flaws

the cartridge is often untwisted;
after a short time, the gearbox begins to crack;
lack of a flashlight.

Makita DF330DWE

The built-in flashlight will illuminate places with a lack of lighting. The reverse function allows you not only to screw in the screws, but also to unscrew them back without additional tools.

You can comfortably adjust the speed and torque limiter to suit your needs.

Speed also depends on how hard you pull the trigger.

Absolute ergonomics of the body - rubber pad and the most comfortable body for work.

The keyless chuck makes changing tooling as easy as possible. There are 18 torque limiting modes.

Specifications:

cartridge diameter: 0.8 - 10 mm;
maximum possible number of revolutions: 1300 rpm;
battery capacity: 1.5 Ah;
battery: Li-Ion (G series);
voltage: 10.8 V;
weight: 1 kg.

Advantages

quality assembly;
fast battery charging;
good equipment;
pretty good power, given the compactness and low weight of the model;
high ergonomics.

Flaws

no charge indicator;
cartridge backlash;
cartridge is quite short.

Makita HP333DWME Li-Ion 4.0 Ah 10.8 V x2 case

The keyless chuck makes changing the chuck as quick and easy as possible. The ergonomic handle with rubber inserts makes the work process more comfortable.

Lithium-ion technology significantly increases the service life of the device and allows you to recharge the screwdriver, regardless of the level of its discharge.

If necessary, you can instantly stop the rotation of the cartridge due to the dynamic brake.

A reverse function is provided.

Now you can work even in poor lighting with a special flashlight attached to the device.

Specifications:

cartridge diameter: 0.8 - 10 mm;
maximum possible number of revolutions: 1700 rpm;
battery capacity: 4 Ah;
battery: Makita 12V max CXT;
voltage: 10.8 V;
weight: 1.2 kg.

Advantages

high battery capacity;
light weight and compactness;
many additional features;
there is a flashlight;
quite attractive price in comparison with competitors.

Flaws

rather weak model in terms of power;
the cartridge is rather short;
cartridge clearance.

The best Makita screwdrivers with torque from 31 to 60 Nm

Models that have more power and battery voltage of 18 volts, and are suitable for more tasks. Cope even with professional needs.

Makita DF457DWE Li-Ion 1.5 Ah 18 V x2 case

The possibility of easy change of equipment due to the keyless chuck - you can change it even with one hand without additional effort.

The tool lasts much longer thanks to a high-quality gearbox with metal gears and professional protection against dust and other contaminants that can disrupt the operation of a screwdriver.

The comfortable grip of the handle, equipped with rubber inserts, increases the level of comfort during use and overall ergonomics.

It also helps to reduce human fatigue while working with the tool.

Specifications:

cartridge diameter: 1.5 - 13 mm;
maximum possible number of revolutions: 1400 rpm;
battery capacity: 1.5 Ah;
battery: Makita 12V max CXT;
voltage: 18 V;
weight: 1.7 kg.

Advantages

impressive power;
compact and quite mobile;
fast charging;
convenient case;
convenience in operation.

Flaws

overcharge;
during operation, the cartridge unwinds;
you can find cheaper and higher quality analogues.

Makita DDF485RF Li-Ion 3 Ah 18 V х1 case

Quick and easy chuck change thanks to its quick-release, now you can do it with one hand and without the help of additional tools.

Adjustment of the tightening force is possible up to 21 steps, which significantly increases the accuracy and quality of work.

All control buttons are located in one place, it is intuitively clear where to press to implement a particular function.

A built-in backlight is provided, allowing you to work even in the darkest places without additional equipment.

The ergonomic handle fits comfortably in the palm of your hand thanks to the rubber grip.

Specifications:

cartridge diameter: 1.5 - 13 mm;
maximum possible number of revolutions: 1900 rpm;
battery capacity: 3 Ah;
battery: Makita 18V LXT;
voltage: 18 V;
weight: 1.1 kg.

Advantages

light weight, but decent power;
quite attractive price;
the presence of a brushless motor;
fast and comfortable work;
ease of use.

Flaws

the cartridge is often untwisted;
no charge indicator;
cartridge clearance.

Makita DDF453RFE

The quick-clamping principle of installation allows you to instantly change the equipment with one hand, without the use of additional equipment, which significantly saves time and effort.

With the help of a rotary coupling, you can quickly and conveniently change the operating mode and torque.

A cooling system for the entire system is provided to increase the overall service life.

There are a large number of various functions that improve the quality of a screwdriver, for example, reverse.

Comfortable and practical handle with rubber coating does not slip during operation and improves overall ergonomics.

Specifications:

cartridge diameter: 1.5 - 13 mm;
maximum possible number of revolutions: 1300 rpm;
battery capacity: 3 Ah;
battery: Makita 18V LXT;
voltage: 18 V;
weight: 1.8 kg.

Advantages

the battery lasts for a long time;
quite powerful work;
very convenient in work;
quality assembly;
two batteries included.

Flaws

heavy enough;
the second speed sometimes junk;
absolutely not mobile.

Makita DHP485SYE

The battery is fully protected from any kind of overload - current, overheating, and so on. This helps to significantly increase the service life.

All switches are concentrated in one place so that you can more comfortably control the tool without spending extra time or effort.

There is a built-in flashlight that allows you to work even in poor lighting conditions.

You can choose any mode of operation, each of which is suitable for a specific material - this greatly facilitates the entire process of work.

A high level of protection against dust and various types of dirt increases tool life.

Specifications:

cartridge diameter: 1.5 - 13 mm;
maximum possible number of revolutions: 1900 rpm;
battery capacity: 1.5 Ah;
battery: Makita 18V LXT;
voltage: 18 V;
weight: 1.7 kg.

Advantages

high build quality;
versatility - suitable for many jobs;
quite high power;
attractive price;
compact model.

Flaws

rather uncomfortable weight;
not quite mobile;
unwinding of the cartridge.

Top models with torque from 61 Nm

Such models ideal for professional jobs and people who use the tool on a daily basis.

Makita DDF481RF Li-Ion 3.0 Ah 18 V х1 case

Powerful device for heavy work in the home and outside.

It is in great demand among ice fishing enthusiasts due to its impressive power even on ice.

The model has a brushless motor, which greatly increases wear resistance, because the brushes no longer require replacement.

Incredibly fast tool changes due to the quick-release chuck, now you can change with just one hand, without all sorts of additional tools.

The torque adjustment clutch allows full control of the tightening torque.

Specifications:

cartridge diameter: 1.5 - 13 mm;
maximum possible number of revolutions: 2100 rpm;
battery capacity: 3 Ah;
battery: Makita 18V LXT;
voltage: 18 V;
weight: 2.6 kg.

Advantages

incredible power;
ease of use;
the presence of a long additional handle;
functional and comfortable case;
pretty low price.

Flaws

heavy device;
not mobile enough;
takes up a lot of space.

Makita DDF482Z, without battery

The main control buttons are located in one place, which allows you to switch modes and settings without being distracted from work.

Two modes are provided for the optimal selection of the number of revolutions and torque work, depending on the purpose of using the screwdriver.

Wide range of torque adjustment for more precise and comfortable control.

There is a built-in flashlight that allows you to work comfortably even in darkened rooms without the use of additional equipment.

Specifications:

cartridge diameter: 1.5 - 13 mm;
maximum possible number of revolutions: 2100 rpm;
battery capacity: 3 Ah;
battery: Makita 18V LXT;
voltage: 18 V;
weight: 1.5 kg.

Advantages

high power;
quality assembly;
compact;
convenient and practical case;
good speed.

Flaws

quite heavy;
heats up during operation;
there is a backlash of the cartridge.

Makita DDF481RTE Li-Ion 5 Ah 18 V x2 case

Enhanced protection against moisture, dust and environmental dirt is provided to ensure longer life.

To cope with the torque, there is an additional elongated handle.

A two-speed gearbox is inserted, the settings of which are extremely convenient to change directly during use, with metal gears that increase the life of the screwdriver.

Built-in flashlight for more comfortable work in dark areas.

Specifications:

cartridge diameter: 13 mm;
maximum possible number of revolutions: 2100 rpm;
battery capacity: 5 Ah;
battery: Makita 18V LXT;
voltage: 18 V;
weight: 2.6 kg.

Advantages

impressive power;
holds a charge for a long time;
two batteries included;
the presence of a built-in flashlight;
good revs in 2nd gear.

Flaws

the mount on the handle for the stop is unreliable;
quite heavy;
overcharge.

Makita DDF481Z, without battery

The main control buttons are concentrated in one place - on top of the ergonomic and comfortable handle.

The presence of two speed modes to select the most successful ratio of the number of revolutions and torque allows you to make the work better and more accurate.

Quick and extremely easy tool change thanks to the keyless chuck - now you can do it with one hand, almost without interrupting your work.

The built-in bit holder is mounted in a ledge on the base, saving time and keeping everything in one place.

Specifications:

cartridge diameter: 13 mm;
maximum possible number of revolutions: 2100 rpm;
battery capacity: 5 Ah;
battery: Makita 18V LXT;
voltage: 18 V;
weight: 2.6 kg.

Advantages

the highest torque in the entire market;
incredible power;
the presence of a flashlight;
steel cartridge;
reliable and durable tool.

Flaws

spindle lock when tightening the cartridge is made extremely poorly;
Noisier than competitors
heavy construction.

Best Network Models

Such models great for homework when you can connect your device to the network.

Makita DF0300, box, 320W

The model is suitable for assembly of furniture and small housework.

The tool has an extremely comfortable body and a handle with rubber inserts that provide ergonomics.

Quick change of tooling with a quick-release chuck - now you can change without additional tools, with just one hand.

A more precise setting is provided by 2 speeds and 20 gradations of torque, which can be selected depending on the type of work and the material of the product on which the action is performed.

Specifications:

cartridge diameter: 1 - 10 mm;
maximum possible number of revolutions: 1500 rpm;
battery capacity: 1.5 Ah;
battery: Makita 18V LXT;
voltage: 18 V;
weight: 1.2 kg.

Advantages

can work all day;
good torque;
lies comfortably in the hand;
well balanced;
compact and lightweight.

Flaws

heats up during operation;
the nozzle periodically falls out;
no shaft lock.

Makita FS4000, 570W

The model is mainly intended for unscrewing and tightening screws and self-tapping screws in household repairs.

There is a depth limiter that allows you to more accurately control the process of immersing the screw without spoiling the material.

The tool has a clip so that it can be comfortably attached to a belt and always kept at hand.

The soft grip on the handle provides a secure and comfortable grip. Also on the case there are a large number of convenient switches and there is a separate reverse.

Specifications:

cartridge diameter: 1 - 10 mm;
maximum possible number of revolutions: 4000 rpm;
battery capacity: 1.5 Ah;
battery: Makita 18V LXT;
voltage: 18 V;
weight: 1.3 kg.

Advantages

light weight;
compactness;
sufficient power for domestic needs;
ergonomics;
convenient to use.

Flaws

not suitable for heavy work;
lack of a flashlight;
few additional features.

Reviews

Customer Reviews

{{ reviewsOverall }} / 5 Grade (3 total valued)

Overall score

Total reviews:

Checked

{{{ review.rating_title}}}

{{{review.rating_comment | nl2br}}}

Review responses ({{review.rating_replies.length}})

This review has no replies yet.

conclusions

Based on the presented characteristics, advantages and disadvantages, we can come to the following conclusions:

It is necessary to pay special attention to the weight and compactness of the screwdriverto make it easier to work in the future.
Additional amenities - flashlight, reverse and so on are quite important in the work.
You need to understand the purpose of the purchase, for domestic needs, it is not necessary to buy a powerful device.

Useful video

This video provides an overview of the Makita DF333DWAE cordless screwdriver:

Reviews Ratings