Rating of the TOP-5 best Neptune leak protection systems in 2021

Neptune kits are modern and reliable equipment that provides a high degree of protection against leaks.

Neptu appliancesn automatically monitor the condition of the room where they are installed and block the water supply in the event of an accident until the malfunctions are eliminated.

What features and parameters of Neptune leakage protection systems to pay attention to when choosing which models are the best today, we will consider in this selection.

Key features of the Neptune kits

Neptun kits include leakage detection sensors, a central control module and motorized shut-off valves.

When choosing such a system, a number of important points should be considered:

• Connecting sensors.
  Wired equipment operates from a common power source.
  It is characterized by the lack of dependence of the quality of the transmitted signal on the distance of the location of the system components.
  Wireless sensors do not require cabling, but are more expensive and depend on the condition of the batteries/batteries.
• Number of sensors/faucets.
  Neptun control units support a certain number of elements - up to 80 sensors and 6 taps (depending on the model).
  The set usually contains a limited number of devices, but if necessary, they can always be purchased additionally.
• Pipeline diameter.
  The ball valves used to block the water supply in case of an emergency are compatible with standard connection threads.
  This is most often a 1/2 inch diameter. Also available in 3/4" and 1" kits.
• Rated pressure.
  Any plumbing equipment is designed for a certain pressure.
  In urban networks, the latter approaches 4-6 bars and higher in emergency situations with water hammer.
  The shut-off valves in the Neptun kits are capable of withstanding 16-40 bar depending on the model.
• Alerts.
  Leak protection systems "Neptune" are equipped with both sound and light alarms.
  Advanced models are able to transfer data to a smartphone or other mobile device autonomously or through the Smart Home ecosystem network.

Rating and review of Neptun leak protection systems

The kits shown are an affordable option for private or industrial use.

They are easy to install, distinguished by reliability, quality and durability.

Leak protection system Neptun Aquacontrol ?

The Neptun Aquacontrol 1/2 inch kit is designed to detect and block leaks in the water supply systems of houses, apartments, administrative and other buildings.

The model will ensure that the water supply is interrupted in case of an emergency and will notify the user of a leak through sound and light alerts.

The system is equipped with Italian CW617N hot forged brass ball valves, wire sensors are equipped with 2 m cables.

It is possible to extend the connection up to 100 meters.

The rated working pressure of the equipment is 16 bar, the response time is 18 seconds.

Technical specifications:

• connection - wired;
• type of power supply - mains, 220 V;
• installation method - surface mounting;
• response time - 18 sec.;
• nominal pressure - 16 bar;
• pipeline diameter - 1/2 inch;
• the maximum number of sensors / taps - 20/6;
• delivery set - control unit, 2 sensors, 2 taps;
• features — self-cleaning function.

Leak protection system Neptun Bugatti Smart ?

The Neptun Bugatti Smart 1/2 inch smart system will provide continuous monitoring, detection and blocking of leaks, notify users of an accident using built-in light and sound alarms, as well as through a smartphone notification.

The model uses a wired and wireless connection.

The components communicate with each other via the Neptun Smart central unit.

The kit is compatible with the Smart Home system and supports remote control.

The device is able to control the state of the room offline, allows user control through the SST Cloud application.

The equipment in auto mode blocks the water supply when the sensors are triggered, remembers the state of the accident, and monitors the installed meters.

Technical specifications:

• connection — wired, wireless;
• type of power supply - network / autonomous;
• installation method - surface mounting;
• response time - 18 sec.;
• nominal pressure - 40 bar;
• pipeline diameter - 1/2 inch;
• the maximum number of sensors / taps - 80/6;
• delivery set - control unit, 3 sensors, 2 taps;
• features - self-cleaning function, integration into the Smart Home system, control via smartphone, Wi-Fi support, optional ability to connect expansion modules.

Leak protection system Neptun Base Light ?

The basic model Neptun Base Light 1/2 inch is designed to detect leaks and localize water supply systems in office and retail premises, private houses, as well as apartments until the faults that caused the accident are eliminated.

The product is equipped with a light and sound alarm, is compatible with a 1/2 inch pipeline, and is powered by a 220 V electrical network.

The model is equipped with one CW617N hot forged brass ball valve.

The sensor is connected to the actuator via a wire 0.5 meters long.

The equipment is surface-mounted and can withstand a maximum working pressure of 40 bar.

Technical specifications:

• connection - wired;
• type of power supply - mains, 220 V;
• installation method - surface mounting;
• response time - 21 sec.;
• nominal pressure - 40 bar;
• pipeline diameter - 1/2 inch;
• the maximum number of sensors / taps - 20/6;
• delivery set - control unit, 2 sensors, 1 tap;
• features — self-cleaning function.

Leak protection system Neptun Bugatti Base ?

The basic kit Neptun Bugatti Base 1/2 inch will timely detect and block water leakage in the heating or water supply system, as well as notify you of an accident with a sound and light signal.

The model is characterized by the use of Italian Bugatti ball valves with high quality PTFE seals.

The system provides emergency opening of shut-off valves in manual mode, is compatible with a 1/2-inch pipeline, and is equipped with SW005 wired sensors.

It is possible to extend the connection line up to 100 meters. The basic length of the connecting wire is 50 cm.

Technical specifications:

• connection - wired;
• type of power supply - mains, 220 V;
• installation method - surface mounting;
• response time - 21 sec.;
• nominal pressure - 40 bar;
• pipeline diameter - 1/2 inch;
• the maximum number of sensors / taps - 20/6;
• delivery set - control unit, 3 sensors, 2 taps;
• features — self-cleaning function.

Leak protection system Neptun Profi Base ?

The professional kit of the Neptun Profi Base 1/2 inch modular protection system will quickly detect a leak and block the water supply in an office or residential area until the fault is corrected.

The set is provided with an informative light and sound alarm, the ability to connect with a wire 50 cm long, and is equipped with two high-quality ball actuators with a torque of 9 Nm.

Cranes are made of high-strength stainless steel.

The model is designed for use with pipes with a diameter of 1/2 inch.

The sensing elements are wired sensors of SW005 type, equipped with 2-meter cables for connection. If necessary, the line can be extended up to 100 meters.

Technical specifications:

• connection - wired;
• type of power supply - mains, 220 V;
• installation method - surface mounting;
• response time - 21 sec.;
• nominal pressure - 40 bar;
• pipeline diameter - 1/2 inch;
• the maximum number of sensors / taps - 20/6;
• delivery set - control unit, 3 sensors, 2 taps;
• features — self-cleaning function.

Reviews

Useful video

From this video you will learn how the Neptune leak protection system works:

Conclusion

• Sets "Neptune" provide a high degree of protection against leaks, control the state of the room in automatic mode and block the water supply in case of an accident.
• Neptun kits are equipped with highly sensitive leak detection sensors, a central control module, and motorized stopcocks.
• When choosing a Neptune leakage protection system, one should take into account the type of its connection, the number of sensors / taps, the diameter of the piping, the operating pressure of the model.